- What are 4.11 gears good for?
- Are 3.73 or 4.10 gears better?
- Will 4.10 gears make my car faster?
- Is 3.55 or 3.73 gears better?
- How much does it cost to get 4.10 gears installed?
- Is 3.42 or 3.73 better?
- What gear ratio is best for speed?
- What is the difference between a 3.73 and 4.10 axle?
- What’s the best gear ratio for 35 inch tires?
- Are 4.10 gears good for towing?
- Are 4.10 and 4.11 gears the same?
- Are 3.73 gears good for highway?
- What gear ratio is better for torque?
- What gear ratio is best for fuel economy?
- How fast can you go with 4.10 gears?
What are 4.11 gears good for?
4.11:1 is a “lower” gear ratio, meaning you have more torque, lower top speed, and you will generally consume more fuel.
Usually people put 4.11:1 gears in trucks to be used off-road for the extra torque and the better “crawling” capabilities..
Are 3.73 or 4.10 gears better?
Vice versa, if the gear ratio is lower it has worse acceleration but a higher top speed….WHICH GEAR RATIO IS FOR YOU?3.73 RATIO4.10 RATIOSlower off the lineQuicker off the lineLower torqueHigher torqueBetter gas mileageWorse gas mileageHigher top speedLower top speedMay 12, 2020
Will 4.10 gears make my car faster?
Most late model Mustangs and many other sports cars come equipped with standard 3.55 gears in their rear differential, however by adding 4.10 gears they can effectively make their drag times faster and deliver more power to the wheels faster.
Is 3.55 or 3.73 gears better?
3.55 will give you a little better gas mileage on the highway and slightly more highway oriented performance. 3.73 may be better for towing, lower end power (off the line acceleration), and may result in worse gas mileage on the highway.
How much does it cost to get 4.10 gears installed?
Installation costs will vary, but a good rule of thumb is between $250 and $300. Be sure to work with a reliable shop that you trust for installations. You can also save money on your installation labor by having your Trac-Lok rebuilt at the same time as your gears are installed, see drop down option above.
Is 3.42 or 3.73 better?
The 3.42 is fine for towing smaller boats, plus you will get better gas mileage for everyday driving. If I were towing frequently on hilly roads, I might would go for the 3.73 for better gas mileage while towing, but the 3.42 should be fine with a 205.
What gear ratio is best for speed?
A gear with a lower numerical ratio, like 3.08:1, does not multiply torque as much, but with an equal rpm input will produce a higher axle or tire speed, all else being equal. This means that rear gear ratios are a compromise.
What is the difference between a 3.73 and 4.10 axle?
The ratio is the number of teeth on the driven gear (ring) divided by the number of teeth on the drive gear (pinion). … So for gear ratio of 3.73, for every one turn of the ring gear, the pinion will turn 3.73 times and for gear ratio of 4.10, for every one turn of the ring gear, the pinion will turn 4.10 times.
What’s the best gear ratio for 35 inch tires?
Depending on the axle, the next lowest ratio from a 4.10:1 is most likely the 4.56:1, which should be selected for towing and performance. Because of the extra weight associated with off-road tires, we usually recommend going with a performance-minded gear ratio for any tire size above 35 inches.
Are 4.10 gears good for towing?
FACT: A 4.10 axle ratio is ideal for towing heavy loads in a mix of city and highway driving and when towing on varied or steep grades. A 4.10 axle ratio will provide improved acceleration in stop and go city traffic. … A 4.10 rear axle ratio is ideal for towing larger 5th Wheel or Gooseneck trailers.
Are 4.10 and 4.11 gears the same?
Registered. It is just two different ways to come up with something that is basically the same. The only difference is the number of teeth on the ring and pinion gears. One company might use 41 on the ring and 10 on the pinion (4.10), while another might use 37 on the ring gear and 9 on the pinion (4.11).
Are 3.73 gears good for highway?
Well, if you plan on doing a lot of freeway driving, you don’t want to choose a gear that’s too low for your car because you’ll be going down the freeway at too high of an RPM. … Shorter gears (higher numbers) are much better suited for accelerating, such as 3.55, 3.73, 3.91’s, 4.11’s etc.
What gear ratio is better for torque?
A numerically higher axle ratio provides a mechanical advantage to send more of the engine’s available torque to the rear tires (and front tires, in a four-wheel drive vehicle), but you pay the price at the fuel pump. So, a truck with optional 3.73 gears will tow a heavier trailer than one with 3.55 or 3.21.
What gear ratio is best for fuel economy?
The lower the number, the better fuel economy, and the higher the number the more towing power you have, but fuel economy suffers. For instance, a 3:31 gets better fuel economy than a 3:73. On the other hand, a 3:73 or perhaps a 4:10 will tow much more, while fuel economy greatly drops.
How fast can you go with 4.10 gears?
With stock size tires you can go 150 mph at 5393 rpm in 5th gear.