- Why is digging so hard?
- Should I use 4×4 or 6×6 fence posts?
- Is 2 feet deep enough for fence posts?
- How do you dig a deep hole without a shovel?
- Can you have half a hole?
- What is a foot hole?
- Will wooden posts rot in concrete?
- How long does it take to dig a 6 foot hole with a shovel?
- How long does it take for excavation?
- How deep is a 6 foot hole?
- How many bags of concrete do I need for a fence post?
Why is digging so hard?
It’s difficult to make a neat hole because it all slides inward.
This is partially because it is broken down to grains of sand that don’t ‘stick’ to each other.
Dirt and rock ‘stick’ together as well, but eventually, pressure can destroy the hole you were digging..
Should I use 4×4 or 6×6 fence posts?
6×6 is overkill for sturdiness. 4×4 is the standard. And if you do it as a privacy fence, 6×6 posts stand out and make it look more substantial.
Is 2 feet deep enough for fence posts?
The minimum depth that you should dig your fence post holes for panel sections is 2 feet. A general formula is to dig the holes one-third to one-half of the post’s aboveground height. The deeper you dig the holes, the more stability your fence has, but you must also purchase longer posts.
How do you dig a deep hole without a shovel?
Dig Postholes with a Clamshell Digger A clamshell digger ($20 and up) is best for most jobs. Just plunge it into the ground, spread the handles and pull out the dirt. As your hole gets deeper, you have to enlarge the top of the hole so you can spread the handles.
Can you have half a hole?
Answer : Holes are always full. There is no such thing as half the hole. Their shape could be half circle or triangle or square but they are always full holes.
What is a foot hole?
noun. 1. 0. (mining) A hole into which the foot can be wedged in order to climb a shaft. noun.
Will wooden posts rot in concrete?
Simply setting the posts in concrete does create a condition that will accelerate rot in the bottom of the posts. With pressure-treated posts, the rot will be slow. … First, the posts should be set on top of a bed of coarse gravel 3 to 6 inches deep, so the base of the post is in contact with the gravel.
How long does it take to dig a 6 foot hole with a shovel?
4.24 minutesThis means it takes 4.24 minutes to dig a 6 foot deep hole of 16 inches diameter.
How long does it take for excavation?
Weather can cause significant delays to this process. But, in general, grading for a house usually takes 1-2 days in ideal weather. Grading for a small condo or strip mall usually takes 3-5 days.
How deep is a 6 foot hole?
The If You Dig A 6ft Hole How Deep Is That Hole correct answer is “About like 20 feet”.
How many bags of concrete do I need for a fence post?
Mix two 50lb bags of concrete with water in a mixing tub or 5-gallon bucket. Add concrete into the hole and around the 4” x 4”. Depending on your climate, let concrete set up for 24 – 48 hours.