Question: Should I Use 4×4 Or 6×6 Fence Posts?

How far can a 4×4 span without support?

A 2×8 up to 12 feet; 2×10 to 15 feet and 2×12 to 18 feet.

The larger the deck, the larger the joists.

For best results, refer to our wood and composite deck joist span table..

How far can a triple 2×12 beam span?

Joist SpansSouthern Pine3-2X1012′-9″3-2X1215′-0″Douglas Fir-Larch, Hem-Fir, Spruce-Pine-Fir, Redwood, Cedars, Ponderosa Pine, Red Pine3X6 OR 2-2X65′-2″3X8 OR 2-2X86′-7″17 more rows

Will wooden posts rot in concrete?

Moisture is woods natural enemy. … With concrete holding the moisture against the wood, wood has no chance and will eventually lose the battle. Now you don’t have to lose all hope because it’s for certain that the concrete around the post will crack, therefore making it easy to pull out when it starts to rot.

Is 2 feet deep enough for fence posts?

The minimum depth that you should dig your fence post holes for panel sections is 2 feet. A general formula is to dig the holes one-third to one-half of the post’s aboveground height. The deeper you dig the holes, the more stability your fence has, but you must also purchase longer posts.

How far off the ground should a wood fence be?

two inchesIn most applications, a wood fence should be installed at least two inches off the ground. Your posts and rot boards (if you choose to install them) should be the only fence components that contact the ground.

Why do fence posts rot at ground level?

The main cause is the wood having prolonged exposure to moisture in soil which means fence posts decay at ground level – just above the concrete base. This means the post will still be solid below and above the damaged area. Insect infestations can also cause rotting in wooden fence posts.

What size post should I use for a 6 foot fence?

The depth of the post hole needs to be 1/3 to 1/2 the height of your fence. For example, if you are building a fence that’s 6 feet tall, you will need a hole that is at least 2 feet deep. That also means that you’d need to use an 8-foot post.

How far can a 2×6 span without support?

How far can a 2×6 Rafter span without support? The table states that 2 X 6 rafters spaced 16 inches on center (o.c) can span a maximum distance of 13 feet 5 inches. Another option are 2 X 8 rafters spaced 24 inches o.c.

How far can a 2×12 span without support?

How far can a 2×12 beam span without support? When supporting joists that span 12 feet with no overhang beyond the beam, a double ply beam can span in feet a value equal to its depth in inches. A double 2×12 beam can span 12 feet; a (2) 2×10 can span 10 feet and so on.

Should I use 4×4 or 6×6 deck posts?

4×4 post will be fine. I have built many decks for new homes with them. 6×6 is more sturdy of course and will not twist as easy, but for structure purposes, 4×4 will be fine.

How deep should a 6×6 post be?

The depth of your hole should be about 1/4 of the height of your post. For a 6×6 post, the diameter of the holes should be about 12 inches square. As a rule the width of your post hole should never be less than 10 inches.

How long will a treated 4×4 post last in the ground?

The Forest Products Laboratory and other research groups have shown that treated wood stakes placed in the ground for more than 40 years remain rot-free. But young pressure-treated decks, many less than 10 years old, are being shoveled into landfills.

What size fence post should I use?

You should choose post materials with a 4 inch width and 4 inch thickness, giving you square wooden board for you post. The height will be equal the height of your fence plus 2 to 3 feet. The extra length is allowance for the ground hole where the post will be buried.

How big of a beam do I need to span 20 feet?

In general terms, joists spaced 16 inches on center can span 1.5 times in feet their depth in inches. A 2×8 up to 12 feet; 2×10 to 15 feet and 2×12 to 18 feet.

Can wood fence posts be 10 feet apart?

Typical spacing is right around 8 feet between each post however different circumstances may call for different measurements and it is not uncommon to have spacing between posts reach up to 10 feet. Once you have a rough idea of your post layout start by digging your first hole.