Should I Pressure Wash My Deck?

How often should you pressure wash your deck?

Frequency.

Most home maintenance contractors recommend power washing your deck once a year.

An annual wash will keep your deck in optimal condition, cutting down on accumulation of dirt, mildew, or algae growth..

Will pressure washing remove deck stain?

Pressure washing is a quick way to remove a deck finish, but it requires some care so as not to damage the deck. A pressure setting of 1500 psi should be strong enough to clean away deck stain. Hold the sprayer about 3 inches off the surface and move the sprayer as you work in the same direction as the grain.

How often should a deck be cleaned?

DO clean the deck thoroughly once a year. When it’s dry and moderately warm—60 to 70 degrees Fahrenheit—apply an appropriate deck-cleaning solution with a roller or sprayer to kill mold and bacteria. Use a utility brush to scrub the deck where it’s especially dirty and where mold or mildew might lurk.

How long after pressure washing a deck can you seal it?

24 to 36 hoursAfter completing the deck power washing, wait 24 to 36 hours before applying sealer. If the weather is cool or humid, wait 48 to 72 hours. The deck must be thoroughly dry to ensure deep penetration of the sealer.

Is there money in pressure washing?

Factors that Influence Income In some regions, professionals working with power and pressure washers can hope to earn between $40 to $60 per hour and if you provide environmental services, you could command a price of $80 to $100 and above.

Is it OK to pressure wash a wood deck?

Often a pressure-washer can effectively clean a deck with just plain water. However, a pressure washer can ruin your deck if it’s not used properly. … If you use it with too much jet pressure or place the tip too close to the surface of your deck, you can deeply etch the wood and cause the fibers to splinter.

Should I sand or power wash my deck?

After a deep power washing, the wood fibers of the various components of the deck often raise as they expand with water. Once dry, these wood fibers can often remain raised and may cause splinters. For this reason, you should plan on sanding your wood deck after power washing and before staining and sealing.

Is stain or paint better for a deck?

Stain is generally less slippery than paint. Some stains are slick, but for the most part they’re flatter and create a less slippery surface than a thick, quality paint job. If safety and slippage is a concern for your deck, stain is generally a better option.

What is the longest lasting deck sealer?

1. BEST OVERALL: SEAL-ONCE MARINE Penetrating Wood Sealer. SEAL-ONCE MARINE Penetrating Wood Sealer is a clear water-based sealer, but it provides the protection you’d expect from an oil-based stain, penetrating right down into the wood fibers for long-lasting protection against moisture damage and mold growth.

How much should I pay to have my deck stained?

The cost to stain your deck typically ranges from $540 to $1,050 with an average of just over $700. This equates to an average cost of $2 to $4 per square foot for labor and materials. Higher-quality stains will run up the price, as will washing or sealing the wood prior to staining.

What is the difference between power washing and pressure washing?

pressure washing question. The main difference with power washing is the heat. To be more explicit, the jet wash in a power washing machine uses heated water, whereas the water in a pressure washer is not heated. … It is particularly recommended on surfaces such as concrete, which will not be damaged by power washing.

What is the best wood deck cleaner?

The Best Cleaners for Your Outdoor Deck01 of 08. Baking Soda, Vinegar and Dish Soap. ThamKC / Getty Images. … 02 of 08. Borax. Amazon.com. … 03 of 08. Bleach. … 04 of 08. Pressure or Power Washer. … 05 of 08. Karcher Deck and Driveway Cleaner. … 06 of 08. Oxygen Bleach Cleaner. … 07 of 08. Spray-and-Forget-it Products. … 08 of 08. Tri Sodium Phosphate or TSP.

Should I power wash my deck before staining?

Pressure washing can help, but if you want your stain to last, using a good deck cleaner and brightener on the deck prior to pressure washing will provide you the best result. A good deck cleaner can remove the gray fibers, dirt, mold, mildew and other impurities deep in the wood.

Should I seal my deck after power washing?

It is so important to allow the wood to dry fully before applying any type of sealant or treatment to the deck. … The deck needs several days of dry weather after pressure washing in order to fully dry out. Regularly pressure washing a wood deck is the best way to remove buildup and prepare it for sealing.

How many PSI Do I need to pressure wash a deck?

For cleaning a wooden deck, you’ll be best served by using the lowest pressure setting that’s still effective. For soft woods like cedar or pine, this is usually about 500 to 600 psi. For harder woods, it can go up to 1200 to 1500 psi. Choose the right tip to use as well.

How long should a deck last?

A deck made of untreated wood can last anywhere from 10 to 30 years. Decks made of treated wood and composite materials can last as long as 50 years. Many composite decks come with a 20-year warranty – and often a lifetime guarantee.

Do you have to remove all old stain before restaining a deck?

Yes, it would be best if you stripped, remove the old stain before you restain. If the stain on the surface of your deck is old, worn out and peeling, the first thing you should do in your quest to renew the deck is to remove all the old stain. Solid deck stains offer much-needed protection to the wood.

Do I need to strip old deck stain?

While a wood cleaner may remove some transparent or semi transparent stains, a deck stain stripper is more effective. When dealing with a deck or wood surface that has remnants of an old failing a stain stripper should be used instead of a wood cleaner.

How much should I charge to pressure wash a deck?

The average cost to power wash a deck ranges from $119 to $244 with most homeowners paying around $0.35 per square foot. To power wash, stain, and seal your deck, expect to spend between $0.50 and $1.50 per sq. ft. or $0.95 per sq. ft.